Panasonic PT-RZ12KEJ 12000 Lumens DLP Projector Black

EU PLUG.

Features:

Reference Images with the Efficiency of Laser:

– The 12,000 lm PT-RZ12K 3-Chip DLP™ Series projectors combine class-leading imaging technologies with the practical advantages of Panasonic SOLID SHINE Laser:

minimal picture quality degradation over long periods in continuous use, 20,000-hour maintenance-free operation, flexible installation, failsafe reliability, and a wealth of powerful Features for creative visual presentations in large spaces.

Bright and Vivid Picture Quality from 3-Chip DLP™ SOLID SHINE Laser:

– Combining 3-Chip DLP™ imaging with original SOLID SHINE Laser Phosphor technology, Panasonic 3-Chip DLP™ SOLID SHINE Laser Series produces vividly colored pictures rich in detail with excellent brightness.

Solid-state laser light sources and specially engineered heat-resistant phosphor wheels work together with three discrete DLP™ modules (R/G/B) for high brightness, true color accuracy, and high contrast in large venues.

Precision Color Reproduction:

– 3-Chip DLP™ SOLID SHINE Laser projectors capture a more accurate color space than comparable laser projectors.

Blue lasers ensure greater precision while an expanded color gamut improves white-balance accuracy.

Lower Total Cost of Ownership:

– Projector delivers up to 20,000 hours1 maintenance-free service at full power with no filters to clean or replace2 thanks to a fully sealed optical block and redesigned air intake.

Energy consumption has also been reduced.

Dual-Laser Optical Engine Assures Failsafe Reliability:

– Dual-Drive Laser Optical Engine groups laser diodes into two discrete modules.

A redundancy circuit works to minimize brightness- and color-uniformity loss should a laser diode fail, making supported products ideal for applications where picture presentation must be maintained.

Dustproof Optics Extend Longevity:

– Hermetically sealed laser modules and a refined air-intake system work to extend life and maintain picture quality in dusty locations.

SOLID SHINE Laser products are tested against more severe guidelines than other projectors for stable operation in dusty environments containing 0.150 mg of particulate matter per cubic meter.

Efficient Cooling System Enhances Reliability:

– A liquid cooling system for the light source Features a new air intake and solid aluminum radiator to suppress temperature rises, allowing stable operation in high temperatures while reducing noise.

Eco Filter Extends Replacement Cycle to 20,000 Hours:

– The Eco Filter incorporates an electrostatic Micro Cut Filter that collects minute dust particles using an ion effect.

It joins with a dust-resistant cabinet to enable long-term use even in punishing conditions.

A long maintenance cycle of up to 20,000 hours1 reduces hassle, while the eco-friendly washable filter2 can be reused.

Lightweight Design Outputs High Brightness:

– With proprietary optical drive system optimized for the light source, efficient cooling systems, and lightweight yet tough cabinet materials, these projectors achieve high brightness in units that are smaller, lighter, and easier to handle.

120 Hz Real Motion Processor Reduces Motion Blur:

– Real Motion Processor interpolates images for a 120 Hz frame-rate.

Smooth, stutter-free 120 Hz reproduction is also possible using simultaneous inputs (two 3G-SDI inputs or DVI-D/HDMI combination).

Together with a refined optical engine that enhances focus, Real Motion Processor delivers a better sense of resolution, contrast, and fluidity of motion.

Detail Clarity Processor 5:

– Proprietary circuitry analyzes individual video frames to identify and clarify areas of the image containing fine details and textures.

Algorithms pull information from four frequency bandwidths, from super-high to low, to sharpen outlines, correct contours, and reduce ringing noise.

Dynamic Contrast Function for High 20,000:1 Contrast:

– Direct laser power output modulation achieves high contrast with less power consumption.

Digitally controlled frame-by-frame scene-linking modulation ensures precise output adjustment, while accurate 20,000:1 contrast is delivered even when bright and dark scenes frequently interchange.

System Daylight View 3:

– Panasonic’s premium System Daylight View 3 stops pictures washing out in bright light and enhances impact in mapping and multi-projector applications.

It uses sensor information to adjust sharpness, manipulate gamma curves, and correct colors to suit on-site conditions.

Long Life Modes for Continuous Operation:

– Select your preferred operational mode to balance control brightness decline with brightness output according to the specific requirements of individual applications.

Free 360-degree Installation:

– SOLID SHINE Laser technology enables free 360-degree installation through any axis.

Together with powered lens shift and a wide range of optional lenses, the projector can be mounted in any way desired without picture distortion temporarily or in permanent applications.

Single-Cable DIGITAL LINK Connection:

– DIGITAL LINK transmits uncompressed video, audio1, and control commands through a single CAT 5e or higher STP cable for distances of up to 150 m (492 ft)2.

Optional DIGITAL LINK Switcher or Digital Interface Box further simplifies installation, reduces cabling and associated costs, and enhances reliability.

Backup Input Setting Assures Picture Display:

– Projectors switch instantaneously to a backup input signal should the primary input signal be disrupted, assuring image display is maintained at all times in venues such as control rooms and adding insurance at events where projection must not be interrupted.

Geometry Manager Pro Software and Upgrade Kits:

– Download free Geometry Manager Pro software to expand geometric and multi-screen setup and calibration capabilities via PC.

The suite includes two upgrade kits that can be optionally unlocked with paid key codes.

ET-UK20 adds uniformity correction and extensive creative masking capabilities.

ET-CUK10 Features Auto Screen Adjustment which enables simultaneous setup (including curved-screen correction) of multiple projectors for multi-screen applications using a compatible camera.

This streamlines edge-blending, color-matching, black-level, stacking, and brightness uniformity calibration.

3D Projection Capability:

– This Panasonic projector is compatible with active 3D projection technology.

Click here to view information on 3D projection using a combination of external IR transmitter and active-shutter 3D glass.

Please contact your sales representative for information on passive 3D projection.

Early Warning Software ET-SWA100 Series (Optional):

– Early Warning Software monitors the status of projectors and displays connected to an intranet, and informs the operator when an abnormality is detected or predicted, or when there are symptoms of trouble.

This minimizes downtime to provide more stable operation.

Common Lenses for Panasonic 3-Chip DLP™ Projectors:

– Panasonic 3-Chip DLP™ projectors share a range of optional lenses, including ultra-short-throw lens and zoom lens for long throw distances, reducing cost of ownership for staging and event companies with large projector inventories.

– Quick Start and Quick Off.

– Laser Safety Guaranteed.

– Built-in Geometric Adjustment.

– Multi-screen Support System.

– Multi-Unit Brightness and Color Control.

– Multi Monitoring & Control Software.

– Art-Net DMX, Crestron Connected™, and PJLink™.

– DICOM Simulation Mode.

– Waveform Monitor Function.

– Rec.

709 Mode for HDTV Projection Specifications:

– Power supply:

100-240 V AC, 50/60 Hz:

– Power consumption1:

1,200 W (1,280